Start with roof surface area.
Use the actual sloped area of the roof. Calculate pitch-adjusted area first if you only have horizontal dimensions.
Estimate whole shingle bundles from roof surface area, waste allowance and your product’s stated coverage. Deduct usable bundles already on hand and optionally calculate the cost of the bundles you need to buy.
This calculator runs in your browser and does not submit your measurement inputs to a server.
Enter your project details.
Bundle quantities are rounded up after waste is added. On-hand bundles must be usable, compatible and have the same coverage as the selected product.
Whole-bundle rounding can provide additional nominal coverage beyond your waste-adjusted area.
Planning estimate only. Starter shingles, ridge and hip caps, underlayment, flashing, fasteners and other accessories are not included. Confirm the product and takeoff with your supplier.
Use the actual sloped area of the roof. Calculate pitch-adjusted area first if you only have horizontal dimensions.
Enter bundles per roofing square or installed area per bundle. Coverage varies by product, so avoid treating the starting value as universal.
Add your chosen waste allowance, round up to whole bundles, then deduct compatible bundles already available.
One roofing square equals 100 square feet. The number of bundles required depends on how much installed area your specific bundle covers.
The calculation combines the roof into a single area estimate. It does not optimize individual shingle cuts, courses or section layouts. Your selected allowance must reflect the actual roof and installation requirements.
If a product specification states exactly 3 bundles per square, use that mode. Entering a rounded area such as 33.33 sq ft instead can legitimately require another bundle at a quantity boundary.
Assume 10% waste and a product specified at 3 bundles per roofing square.
This example covers field shingles only. Add the other roofing components to your material list separately.
Understand bundle coverage, rounding and what your material estimate includes.
Use the figure published for your chosen product. The calculator starts with an example of 3 bundles per square, but that is not a universal coverage rate. One roofing square is 100 square feet.
No. It estimates field shingles covering the roof planes. Starter strips and ridge or hip caps need their own measurements and product coverage.
Enter sloped roof surface area. House floor area can differ substantially because of roof pitch, overhangs, roof layout and multiple stories. Use the roof area calculator first if necessary.
The estimate assumes you purchase whole bundles. If the area requires 82.5 bundles, the rounded requirement is 83. The cost uses whole additional bundles after deducting usable stock.
No. If the area you enter already includes your desired waste allowance, set the additional waste percentage to 0. Otherwise, enter net area and add the allowance here.
Whole bundles can have more nominal installed coverage than the waste-adjusted target area. The difference shown here is a mathematical coverage allowance, not a guarantee of unused shingles after installation.
Additional bundles to buy becomes zero. The total project requirement remains visible. Only count stock that is usable and matches the selected product and coverage.
No. The optional cost is additional bundles multiplied by your entered price per bundle. The currency selector labels the amount; it does not convert prices or retrieve live rates.
Calculate the roof surface area you need for this estimate.
Calculate roof area ↗Convert between roofing squares, square feet and meters.
Convert roof area ↗Calculate pitch and slope from your roof measurements.
Calculate roof pitch ↗