Plan your installation budget

Roofing Labor Calculator

Estimate roofing labor by roof area or by crew hours. Use your own rates, add separate labor charges and set a contingency allowance for your project.

Area or crew method ft², m² & roofing squares Clear cost breakdown

Your labor inputs

Choose one estimating method. Area-based and crew-based costs are alternatives and are not added together.

Label only; no exchange conversion.
Use actual sloped area. In crew mode, area is used only to calculate cost per area unit.
Labor only. Enter the rate for the full scope you intend to include.
Only charges not included in your selected rate.
Illustrative allowance; adjust as needed.
Use a consistent scope. Include setup, installation, tear-off or cleanup only when your rate covers those tasks. Materials, equipment, disposal, tax and contractor profit are not automatically added.
Simple project planning

Choose the method that matches your quote.

01 / DEFINE

Set the work scope

Decide which tasks your labor rate includes. Use actual roof surface area, including slope, without adding a material waste percentage.

02 / CALCULATE

Enter a rate or crew plan

Use a per-area installation rate, or enter workers, working days, hours and an hourly rate. Both methods use your own pricing inputs.

03 / REVIEW

Allow for separate charges

Add extra labor costs only once. Choose a contingency allowance and review the breakdown before using the result in a larger roofing budget.

Roofing labor formulas

Area method
Base labor = roof area × labor rate

Crew method
Worker-hours = workers × days × hours per day
Base labor = worker-hours × hourly rate
Burden = base labor × burden % ÷ 100

Both methods
Subtotal = base labor + applicable burden + extras
Total = subtotal × (1 + contingency % ÷ 100)

Example crew estimate

For an illustrative 2,000 ft² project, assume 4 workers, 2 days, 8 hours per worker each day and an hourly rate of $30.

Worker-hours: 4 × 2 × 8 = 64
Base labor: 64 × $30 = $1,920
Additional burden at 15% = $288
Other labor charges = $200
Subtotal = $2,408
Contingency at 10% = $240.80
Estimated total = $2,648.80

These numbers explain the calculation. They are not market rates or an estimate of how quickly a crew can roof a particular building.

Common questions

Roofing labor Calculator FAQs

Understand your estimate before adding it to a project budget.

How do I calculate roofing labor cost?

Multiply roof area by your labor rate per matching area unit. Alternatively, multiply workers by working days, hours per day and the hourly rate per worker. Add any separate labor costs and your chosen contingency.

What is the difference between crew-hours and worker-hours?

One hour worked by four people equals four worker-hours. This calculator multiplies the number of workers by the hours each worker works, then applies a per-worker hourly rate. Do not enter a whole-crew hourly rate in that field.

Does crew mode calculate how many days the job will take?

No. Working days are your input. Roof complexity, access, weather and the tasks included can change the schedule. Confirm the planned duration before entering it.

How do I handle different worker rates or overtime?

For a shared schedule, use an average hourly rate that reflects your crew's costs. For different schedules, overtime premiums or separate work phases, calculate each group separately and combine the results. Allocate shared extra costs only once.

What does additional labor burden mean?

It is an optional percentage added to base crew labor for employer costs not already in the hourly rate. It is not a tax or payroll calculator. If you use a fully loaded hourly rate, leave the additional burden at zero.

Does this calculator include materials or contractor profit?

No automatic allowance is added for materials, equipment, disposal, taxes, overhead or profit. A quoted labor rate may already include some business costs. Check its scope and avoid adding those costs twice.

Does changing units change the total?

Switching between square feet, square meters and roofing squares converts the area and per-area labor rate together, preserving the estimate apart from rounding. One roofing square equals 100 square feet. Currency selection changes the label only.

Scroll to Top