Plan your tile order

Roof Tile Calculator

Estimate how many field tiles your roof needs using roof surface area and manufacturer coverage. Add waste, deduct usable stock and round your purchase to complete packs.

✓ Square feet or meters ✓ Stock and pack calculations ✓ Optional material cost

Enter your tile requirements

Use the actual sloped roof area and the coverage rate for your selected tile at the specified installation gauge.

The default 10 tiles per m² is an example only. Enter the product’s installed coverage rate. Do not calculate coverage from tile length × width because installed tiles overlap.
Example allowance for cuts and breakage. Adjust for your project. Use 0 if waste is already included.
Count only compatible, usable field tiles.
Enter 1 if buying individual tiles. For packs or pallets, enter the number of tiles in one purchase unit.
Use a per-tile price, not a pack price.
Field tiles only. Ridge, hip, verge and other special tiles are excluded. This estimates material quantities; it does not assess roof loading or determine installation specifications.
Three steps to your estimate

How to calculate roof tiles

01 / MEASURE

Find the roof surface area

Add the roof planes that will use the same tile product. Use their actual sloped area. A building’s floor area does not account for roof pitch or overhangs.

02 / CHECK COVERAGE

Enter the product’s tile rate

Use the manufacturer’s tiles-per-area figure for the intended installation. Match the coverage rate to its correct unit: m², ft² or roofing square.

03 / PLAN YOUR ORDER

Allow for waste and packaging

Set your waste allowance, deduct usable stock and enter tiles per pack. The calculator rounds the remaining purchase up to complete packs.

Roof tile calculator formula

First, roof area and tile coverage are converted to compatible units. The calculator then applies these steps:

Required tiles
= round up(area × tiles per area × (1 + waste ÷ 100))

Tiles still needed
= maximum(0, required tiles − usable stock)

Packs to purchase
= round up(tiles still needed ÷ tiles per pack)

Tiles to purchase
= packs to purchase × tiles per pack

Optional material cost equals purchased tiles multiplied by your entered per-tile price.

Example: a 100 m² tiled roof

Suppose your roof covers 100 m² and your selected product requires 10 tiles per m². You enter 10% waste, already have 100 usable tiles, and buy packs of 24 tiles.

Required tiles = 100 × 10 × 1.10 = 1,100
Remaining need = 1,100 − 100 = 1,000
Packs = round up(1,000 ÷ 24) = 42
Purchase quantity = 42 × 24 = 1,008 tiles
Extra from pack rounding = 8 tiles

The eight additional tiles come from purchasing complete packs. They are separate from the waste allowance already included in the required quantity.

Before ordering

Roof tile calculator questions

How many roof tiles do I need per square meter?

There is no single figure for every roof tile. Use the manufacturer’s coverage rate for your tile model and installation gauge. The example rate in this tool is editable and should be replaced with your product’s data.

Can I calculate coverage from a tile’s dimensions?

Overall tile dimensions do not describe installed coverage because tiles overlap. Use a published installed coverage rate that accounts for the required headlap, sidelap and gauge.

Does the calculator add roof pitch?

No. It expects the actual roof surface area, so it does not apply another pitch multiplier. If you only have horizontal dimensions, start with the Roof Area Calculator.

How much waste should I add?

Choose an allowance for your roof layout, cuts, handling and product. The 10% default is an example, not a universal recommendation. If your entered area already includes waste, set the allowance here to zero.

Does this include ridge and hip tiles?

No. This estimates field tiles covering the main roof planes. Ridge, hip, verge, ventilation and other special tiles need separate quantities based on the roof details and chosen system.

What if my supplier sells individual tiles?

Set tiles per purchase pack to 1. The purchase quantity will equal the whole-tile shortfall after deducting your usable stock.

Can I combine different tile products?

Run a separate calculation for each product or coverage rate. Existing stock should only be deducted from the matching product’s requirement.

Does the price estimate include installation?

No. It multiplies your per-tile price by the tiles being purchased, including pack rounding. Labor, accessories, delivery and taxes are excluded. The currency selector labels your price and does not convert exchange rates.

Scroll to Top