Valley Flashing Calculator
Estimate full-length metal valley flashing pieces for separate roof valleys. Include end overlaps, optional spare pieces, matching stock and your supplier’s price per piece.
How to calculate valley flashing
Measure each valley run
Use its actual sloping length, including any end extensions required by the project details. Enter each valley on a separate line.
Account for each end joint
Enter the full piece length and specified end overlap. The first piece covers its full length; each additional piece loses one overlap length.
Add spares and apply stock
Sum the independently rounded valley quantities, add optional spares and deduct matching full pieces already available.
Valley flashing calculation formula
Let R be the valley length, S the stock piece length, and O the overlap. All three must use the same unit.
Pieces = 1
For a longer valley:
Pieces = 1 + round up((R − S) ÷ (S − O))
Coverage from N pieces:
Coverage = N × S − (N − 1) × O
Spare pieces:
Round up(total base pieces × spare percentage ÷ 100)
The overlap must be smaller than the full piece length. A valley covered by one piece has no end-overlap joint.
Example: two 20 ft valleys
Assume two 20 ft valleys, 10 ft stock pieces and an illustrative 6 in end overlap.
Additional coverage per piece = 10 − 0.5 = 9.5 ft
Pieces per valley = 1 + round up(10 ÷ 9.5) = 3
Base quantity for both valleys = 6 pieces
With no spares and 1 matching piece in stock, purchase 5 pieces.
Two overlapping 10 ft pieces cover only 19.5 ft, so each 20 ft valley needs a third piece under this model. Offcut reuse between valleys is not included.
Valley flashing calculator questions
How many valley flashing pieces do I need?
Calculate each valley separately using its actual length, the stock piece length and the overlap at each joint. Add the whole-piece quantities together, then include spares and deduct matching stock.
Should I measure the valley on the roof or on a floor plan?
Enter the actual distance along the sloping valley line. A horizontal plan measurement is a different dimension. This calculator does not convert roof pitch into valley length.
Does flashing width change the piece count?
This calculation assumes one suitably specified flashing channel along each valley. It calculates length quantities only and does not determine the required width, profile or metal thickness.
What end overlap should I use?
Use the overlap specified for your selected product and roof details. The default is an example for calculation, not an installation requirement.
Why is each valley rounded separately?
Every valley starts its own run of flashing. Dividing combined valley length by piece length can underestimate the pieces required when overlaps and separate starts are considered.
Can the calculator reuse a trimmed piece in another valley?
No. Each valley is allocated new full stock pieces. Reusing suitable remnants requires a separate cutting plan that accounts for shape and installation details.
Does this also calculate valley membrane or underlayment?
No. This tool counts metal flashing sections. Membrane and underlayment use separate widths, areas and overlap assumptions and should be estimated independently.
Are installation and currency conversion included?
The optional subtotal covers purchased pieces at the price you enter. Labor, accessories, delivery and taxes are excluded. Currency selection labels the price without converting exchange rates.